Case CX80C Midi Excavator

Manufacturer: Case
Model: Case CX80C Midi Excavator
Engine: Isuzu AP/4LE2X
Engine Power: 54hp
Weight: 8690kg
Height 2.86m
Width 2.32m
Track Length 2.85m
Track Width 450mm


The Case CX80C Midi Excavator meets Tir4 Final regulations without the need for a Diesel Particulate Filter (DPF). This means no need for filter regeneration, no fuel used to burn particulate matter and no need to replace an expensive DPF.

Emissions are minimised by cutting fuel consumption with an efficient common rail engine and an advanced variable control Cooled Exhaust Gas Recirculation System. Then, a Diesel Oxidation Catalyst (DOC) reduces the pollutants in the exhaust gas through a chemical reaction. The DOC does not need to be replaced; it lasts the whole machine’s lifecycle. This system is highly efficient and very simple.


The Case CX80C Midi Excavator features a highly reliable 4 cylinder 56hp Isuzu engine. The turbo-charged system together with the intercooler ensure a prompt and powerful response to loads and contributes to generating more power out of every drop of fuel.


The standard auto-idle system saves fuel and cuts emissions by automatically reducing engine speed after 5 seconds of machine inactivity. If it continues for a certain period of time, the idle shut down function detects the continuous low idle condition and automatically stops the engine, further reducing emissions and fuel consumption. Both auto-idle and idle shut down functions can easily be deactivated from the instrument cluster. The multi-stage injection of the electronic common rail engine ensures optimised combustion resulting in great fuel economy, less particulate emissions and lower noise.

Three different working modes on the Case CX80C Midi Excavator adds more fuel savings without compromising on performance.

Auto Mode This is most appropriate for grading, lifting and precision work.

Heavy Mode This delivers the best balance between productivity and fuel economy.

Speed Priority Mode This provides extra speed and power for the most demanding jobs that require maximum productivity.


The hydraulic system has been optimised to deliver even better manoeuvrability and cycle times up to 7% faster than the B Series, and cycle times are up by 7% too! Great hydraulic power is supported by the increased hydraulic oil flow (148l/min) +9% vs the B Series.

The innovative pump transition reduction control is a very accurate system that continuously monitors machine operations and then decreases pump loads whenever possible. As a result, hydraulic power is available on demand and fuel consumption is minimised.


The large cab on the Case CX80C Midi Excavator with it’s huge glazed area provides outstanding visibility all round. The left pillar has been removed and the glazed surfaces on the left side, on the front and on the right side have been dramatically increased.

The Case CX80C have the same cab as the larger CASE excavators, which means plenty of room for the operator, vast array of options for the seat and control levers, and features usually found on high category machines.

The cab of the Case CX80C midi excavator has been completely redesigned, meeting ROPS and FOPS Level II safety standards, and ensuring best-in-class operator protection.

The short tail and front swing radius design makes the Case CX80C the best solution to work efficiently in confined spaces. The compact design minimises disruption in urban and road jobsites, as well as the possibility of hitting something when swinging the upper structure of the excavator. The smooth and round shape design of the new cab was studied for maximum reliability and functionality.

The standard full colour monitor is conveniently located so that  is easy to read but has minimum impact on front and right side visibility. Every machine is equipped with the efficient automatic A/C, which creates a pleasant climate inside the cab with its 6-vent system combined with a high wind flow of 430m3/s. The new A/C is not only 20% stronger than the B Series System, it is also quieter. Proportional controls of the first and second auxiliary circuits can be ordered as optional for maximum controllability and comfort, when the machine is used with hydraulic powered attachments. The rear view camera s another interesting feature which provides more safety on the jobsite and reduces operator fatigue.


The hydraulic system, filters, engine and radiators can easily be reached from ground level, allowing intuitive, safe and fast maintenance operations. The whole layout of the machine has been optimised, prioritising simplicity of maintenance. The results are outstanding: a 40% improvement on the SAE serviceability index.

The built-in monitor system includes a self-diagnosis that alerts the operator in case of clogged air, oil or hydraulic filters, and gives reminders of due maintenance, preventing damage to the machine.

Download Case CX80C Midi Excavator Brochure


Sign up to our newsletter to get all out latest news and special offers direct to your inbox.

Download Brochure